Kubota L3240, Operator'S Manual

Page: 63 / 157

41 OPERATING THE TRACTOR
A
When the brake pedal or the reverse pedal has been
depressed to release the cruise control, move the
cruise control lever by hand back to the "NEUTRAL
(OFF)" position.
A
When you stand up from the seat with the speed
control pedal stepped on or the cruise control lever
engaged (ON), the engine will stop regardless of
whether the tractor is moving or not. This is because
the tractor is equipped with Operator Presence Control
system (OPC).
C
IntelliPanel(TM) Message
1. The cruise control indicator stays on while the tractor
is running under cruise control.
2. Step on the speed control pedal until the tractor goes
beyond the cruise speed. Now the indicator starts
flashing.
3. It goes out when the cruise control is released with
setting the cruise control lever to "NEUTRAL (OFF)" or
depressing the brake pedal or reverse pedal.
B
ATA (Auto Throttle Advance) Lever
Get this lever engaged (ON), and the tractor speed and
the engine rpm can be controlled with the speed control
pedal. It helps pull a trailer or the like more easily.
Before moving the lever, be sure to return the speed
control pedal to "NEUTRAL" position.
(1) Cruise control lever (A) "INCREASE"
(B) "DECREASE"
(C) "NEUTRAL"
(1) Cruise control indicator
(1) ATA lever
(2) Speed control pedal (A) "ENGAGE" (ON)
(B) "DISENGAGE" (OFF)
HST
GST
MT