Taking out of service and storage
150
Start-up after taking out of service
!
If necessary, clean the excavator thoroughly (page 124).
!
Check the hydraulic oil for condensate water. Replace the oil if necessary (page 133).
!
Remove the grease from the piston rods of the hydraulic cylinders.
!
Install the battery (page 136).
!
Check the safety devices for proper operation.
!
Carry out the pre-operational services (page 61). If defects are detected during start-up, repair the defects
before proceeding.
!
If the safety inspection is due while the vehicle has been taken out of service, the inspection must be per-
formed before start-up.
!
Start the engine (page 68). Run the excavator at idle and check all functions.
