Maintenance
130
Replacing the fuel filter
!
Open the engine compartment cover (page 107).
!
Turn the cock (1) at the water separator to the OFF position.
!
Remove the fuel filter (2).
!
Wet the rubber seal of the new filter with fuel.
!
Install a new filter and tighten it by hand.
!
Set the cock to the ON position.
!
Bleed the fuel system (page 104).
!
Check the fuel filter for leaks.
!
Close the engine compartment cover.
Checking and cleaning the water separator
!
Open the engine compartment cover (page 107).
!
Turn the cock (3) to the OFF position.
!
Unscrew retainer (1) while holding on to the cup (2).
!
Remove the cup.
Dispose of cleaning cloths according to the applicable environmental protection regulations.
Water and impurities in the fuel settle in the water sep-
arator. A red plastic ring (4) in the water separator
floats on the water. If such substances have deposited
or the plastic ring has come up to the mark (5), the wa-
ter separator must be emptied.
Place a cleaning cloth under the water separator to
prevent fuel from running onto the ground.
2
1
OFF
OFF