manualshive.com logo in svg

Kubota KUBOTA RTV-XG850, Operator'S Manual

Share
Download
Kubota KUBOTA RTV-XG850 Operator'S Manual Download Page 59

PERIODIC SERVICE

 WARNING

To avoid serious injury or death:

• Do not work under any hydraulically supported

devices.  They  can  settle,  suddenly  leak  down,
or be accidentally lowered. If necessary to work
under  vehicle  or  any  vehicle  elements  for
servicing or adjustment, securely support them
with stands or suitable blocking beforehand.

HOW TO OPEN THE HOOD AND

TILT THE SEAT

 WARNING

To  avoid  serious  injury  or  death  from  contact  with
moving parts:

• Never  open  the  cover  under  the  seat  while  the

engine  is  running  unless  servicing  requires
such access.

1. Hood

To open the hood, pull the latch lever toward left side of
machine to release the latch and open the hood.

(1) Latch lever
(2) Hood

(A) “RELEASE”

NOTE :

• To  close  the  hood,  press-fit  the  hood  into

position with both hands.

2. Seat

1. To  open  the  seats,  raise  the  seats  to  the  forward

position.

2. Remove the utility box and maintenance cover.

(1) Operator's seat
(2) Passenger seat
(3) Utility box

(1) Maintenance cover

HOW TO OPEN THE HOOD AND TILT THE SEAT

 PERIODIC SERVICE

RTV-XG850

55

Summary of Contents for KUBOTA RTV-XG850




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands