Kubota KUBOTA RTV-XG850 Operator'S Manual Download

Page: 22 / 99

SPECIFICATIONS

SPECIFICATION TABLE

Model

RTV-XG850

Worksite

Engine

Model

GZ8510

Type

2 cylinder DOHC, 4-cycle, Liquid-cooled, EFI Gas

Displacement

L (cu. in.)

0.851 (51.9)

Low idling revolution

rpm

1200 to 1300

Fuel capacity

L (U.S.gals)

32.7 (8.6)

Transmission

Continuously variable transmission (CVT) with inertial clutch

Wheels, drive system

4, Rear 2WD or 4WD

Differential lock

Front: LSD

Rear: foot operated

Gear selection

Hi-Low range forward, neutral, reverse

Brakes

Front/rear

Dry disk brake

Parking brake

Rear mechanical/hand operated

Steering

EPS (Electric power steering)

Suspension

Front

4 wheel independent suspension

Rear

Dimensions

Length

mm (in.)

3093 (119.6)

Width

mm (in.)

1605 (63.2)

Height, overall

mm (in.)

2020 (79.5)

Front tread centers

mm (in.)

1320 (52)

Rear tread centers

mm (in.)

1320 (52)

Wheelbase

mm (in.)

2045 (80.5)

Ground
clearance

front axle

mm (in.)

249 (9.8)

rear axle

mm (in.)

251 (9.9)

Turning diameter

m (ft)

8.0 (26.2)

Max. rolling weight (towing capacity)

kg (lbs.)

Level ground: 907.2 (2000)

Steep ground: 703 (1550)

Payload capacity

kg (lbs.)

643 (1417)

Weight (with fuel and fluids)

kg (lbs.)

854 (1883)

Gross Vehicle Weight Rating (GVWR)

kg (lbs.)

1497 (3300)

Cargo bed

Width

mm (in.)

1465 (57.5)

Length

mm (in.)

1030 (40.5)

Depth

mm (in.)

290 (11.4)

Volume

(cu.ft.)

0.43 (15.2)

Bed height (unloaded)

mm (in.)

887 (34.9)

Cargo bed capacity

kg (lbs.)

454 (1000)

(Continued)

SPECIFICATIONS

SPECIFICATION TABLE

RTV-XG850

Summary of Contents for KUBOTA RTV-XG850




































































































Search results

Summary of Contents for KUBOTA RTV-XG850

Reviews:

Related manuals for KUBOTA RTV-XG850

Brands by name

Popular brands

Kubota KUBOTA RTV-XG850, Operator'S Manual

Search results

Summary of Contents for KUBOTA RTV-XG850

Reviews:

Related manuals for KUBOTA RTV-XG850

Brands by name

Popular brands