Kubota K008-5, Operating Instructions Manual

Page: 33 / 168

Safety rules
W9215-8135-1
31
06/2021
Protective structure of roll-over safety bar
The roll-over safety bar was designed in accordance with current safety standards and tested for verification as:
To ensure greatest protection by means of this protective structure, the following applies:

The seat belt must be fastened while the excavator is being op-
erated.

Do not make any structural changes to the protective structure.

In the event of damage, please contact your KUBOTA dealer.
(Do not repair!)

Never operate the excavator without the protective structure.

Never operate the machine with a higher operating weight than
the maximum permissible total weight indicated on the ROPS
identification plate (1).

If the roll-over safety bar (1) is elevated and locked in that po-
sition, the operator is protected from being crushed in the event
of the machine tipping over if the seat belt is tightly fastened.
The excavator is equipped with a protective structure that protects the operator from severe injury or
death if the machine crashes or overturns.
Roll-over protection ROPS (Roll-Over Protective Structure)
1
1