Kubota BX1880, Operator'S Manual

Page: 100 / 114

SERVICE EVERY 1000 HOURS
OR 1 YEAR
1. Replacing of the air cleaner
element
Replace the air cleaner element every 1000 hours or
every 1 year whichever comes faster.
(See Cleaning the air cleaner element on page 88)
SERVICE EVERY 1500 HOURS
1. Checking the injection pressure of
the fuel injection nozzle
• Consult your local KUBOTA Dealer for checking the
injection pressure of the fuel-injection-nozzle.
SERVICE EVERY 2000 HOURS
OR 2 YEAR
1. Flushing the cooling system and
changing the coolant
WARNING
To avoid serious injury or death:
• Do not remove the radiator cap while the
coolant is hot. When the coolant is cool, slowly
rotate the radiator cap to the first stop and allow
sufficient time for excess pressure to escape
before removing the radiator cap completely.
IMPORTANT :
• Do not start the engine without coolant.
• Use clean, fresh, soft water and the antifreeze to
fill the radiator and the recovery tank.
• When mixing the antifreeze with water, the
antifreeze mixing ratio is the following
percentage.
Antifreeze mixing ratio with water 50%
• Securely tighten the radiator cap. If the radiator
cap is loose or improperly fitted, water may leak
out and the engine could overheat.
Be sure to flush the cooling system and to change the
coolant once every 2000 hours or every 2 years
whichever comes faster.
Coolant capacity (with recovery
tank)
BX1880
2.9 L
(3.1 U.S.qts.)
BX2380
3.1 L
(3.3 U.S.qts.)
BX2680
3.3 L
(3.5 U.S.qts.)
1. Stop the engine and let it cool down.
PERIODIC SERVICE SERVICE EVERY 1000 HOURS OR 1 YEAR
96
BX1880,BX2380,BX2680