Kubota BX1880-AU, Operator'S Manual

Page: 38 / 110

the tractor is equipped with the operator-
presence-control-system (OPC).
8. Speed set device [BX2380 and
BX2680]
The speed-set-device is designed for tractor-operating-
efficiency and operator's comfort. Speed-set-device will
provide a constant forward operating speed by
mechanically holding the speed-control-pedal at a
selected position.
(1) Speed control pedal (2) Speed set rod
8.1 How to use the speed set device
[BX2380 and BX2680]
To engage the speed set device
1. Accelerate the engine speed to desired level using
the speed-control-pedal.
2. Push and hold the speed-set-rod downward to on
position.
3. Release the speed-control-pedal.
4. Release the speed-set-rod.
Desired engine speed will be maintained.
To disengage the speed set device
1. Depress the brake pedal.
IMPORTANT :
• To prevent the damage of the speed-set-device,
do not depress the reverse pedal when the
speed-set-device is engaged.
NOTE :
• If you step on the speed-control-pedal on the
forward acceleration side, the speed-set-device
will disengage.
• The speed-set-device will not operate in
reverse.
(1) Speed control pedal
(2) Speed set rod (A) On
(B) Off
ACCESSORY
1. 12 V electric outlet
You may use the 12 V electric outlet to connect an
auxiliary light or other devices.
IMPORTANT :
• Do not use as a cigarette lighter.
• Do not use when wet.
NOTE :
• Do not connect a light or other device that
draws more than 120 watts to 12 V electric
outlet. The battery may discharge very rapidly
or the 12 V electric outlet may fail.
INSTRUMENT PANEL AND CONTROLS FOOT CONTROLS AND HAND CONTROLS
34
BX1880, BX2380, BX2680