43
HYDRAULIC UNIT
HYDRAULIC UNIT
3-POINT HITCH CONTROL SYSTEM
B
Position Control
This will control the working depth of 3-point hitch
mounted implement regardless of the amount of pull
required.
A
If the 3-point hitch can not be raised by setting the
hydraulic control lever to the UP position after long
term storage or when changing the transmission oil,
turn steering wheel to the right and left several times
to bleed air from the system.
A
Do not operate until the engine is warmed up. If
operation is attempted when the engine is still cold, the
hydraulic system may be damaged.
A
If noises are heard when implement is lifting after the
hydraulic control lever has been activated, the
hydraulic mechanism is not adjusted properly. Unless
corrected, the unit will be damaged. Contact your
KUBOTA Dealer for adjustment.
B
3-point Hitch Lowering Speed
To avoid personal injury:
A
Fast lowering speed may cause damage or
injury. Lowering speed of implement should be
adjusted to 2 or more seconds.
The lowering speed of the 3-point hitch can be controlled
by adjusting the 3-point hitch lowering speed knob.
(1) Position control lever
(A) "FLOAT"
(B) "DOWN"
(C) "UP"
(1) 3-Point hitch lowering speed knob
(A) "FAST"
(B) "SLOW"
(C) "LOCK"