3-POINT HITCH & DRAWBAR
40
To avoid personal injury:
A
Be sure to stop the engine and remove the key.
A
Do not stand between tractor and implement
unless parking brake is applied.
A
Before attaching or detaching implement,
locate the tractor and implement on a firm, flat
and level surface.
A
Whenever an implement or other attachment is
connected to the tractor 3-point hitch, check
full range of operation for interference, binding
or PTO driveline separation.
B
Lifting Rod (Right)
Level a 3-point mounted implement from side to side by
turning the adjusting turnbuckle to shorten or lengthen the
adjustable lifting rod with the implement on the ground.
After adjustment, tighten the lock nut securely.
B
Top Link
1. Adjust the angle of the implement to the desired
position by shortening or lengthening the top link.
2. The proper length of the top link varies according to
the type of implement being used.
B
Check Chains
Remove the snap pin and adjust the turnbuckle to control
horizontal sway of the implement.
After adjustment, re-set snap pin.
2. Attaching and detaching implements
(1) Adjusting turnbuckle
(2) Lock nut
(1) Turnbuckle
(2) Snap pin
