Kubota B1830, Workshop Manual

Page: 91 / 548

GENERAL B1830,B2230,B2530,B3030, WSM
G-66
9. TIRES
[1] TIRE PRESSURE
WARNING
• Do not attempt to mount a tire on a rim. This should be done by a qualified person with the proper
equipment.
• Always maintain the correct tire pressure. Do not inflate tires above the recommended pressure shown
in the operator's manual.
Though the tire pressure is factory-set to the prescribed level, it naturally drops slowly in the course of time. Thus,
check it everyday and inflate as necessary.
[B1830, B2230, B2530]
[B3030]
NOTE
• Maintain the maximum recommended pressure in the front tires, when using a front loader or when
equipped with a full load of front weights.
Dual Tires
Dual tires are not approved.
9Y1210003GEG0073US0
Tire sizes Inflation Pressure
Rear
8-16, 4PR 160 kPa (1.6 kgf/cm
2
, 23 psi)
9.5-16, 4PR 140 kPa (1.4 kgf/cm
2
, 20 psi)
9.5-18, 4PR 140 kPa (1.4 kgf/cm
2
, 20 psi)
10.5-18, 4PR 140 kPa (1.4 kgf/cm
2
, 20 psi)
315/75D-15, 4PR 100 kPa (1.0 kgf/cm
2
, 14 psi)
31 x 13.5-15, 4PR 140 kPa (1.4 kgf/cm
2
, 20 psi)
Front
6-12B, 4PR 200 kPa (2.0 kgf/cm
2
, 28 psi)
6-12, 4PR 200 kPa (2.0 kgf/cm
2
, 28 psi)
6.00-12, 4PR 180 kPa (1.8 kgf/cm
2
, 26 psi)
7.00-12, 4PR 170 kPa (1.7 kgf/cm
2
, 24 psi)
24 x 8.50-12, 4PR 160 kPa (1.6 kgf/cm
2
, 23 psi)
22 x 8.50-12, 4PR 160 kPa (1.6 kgf/cm
2
, 23 psi)
Tire sizes Inflation Pressure
Rear
12.4-16, 4PR 110 kPa (1.1 kgf/cm
2
, 16 psi)
13.6-16, 4PR 100 kPa (1.0 kgf/cm
2
, 14 psi)
Front
7-12, 4PR 170 kPa (1.7 kgf/cm
2
, 24 psi)
24 x 8.50-12, 4PR 150 kPa (1.5 kgf/cm
2
, 22 psi)
KiSC issued 05, 2012 A