Kubota B1830, Workshop Manual

Page: 65 / 548

GENERAL B1830,B2230,B2530,B3030, WSM
G-40
[10] CHECK POINTS OF EVERY 1 YEAR
Replacing Air Cleaner Element
1. Remove the air cleaner cover (3) and element (5) (or primary
(2)).
2. When replacing the air cleaner element (5) (or primary (2)),
replace the secondary element (1) as well:
Once a year or after every six times of cleaning, whichever
comes first.
IMPORTANT
• To prevent serious damage to the air intake system, use
only a KUBOTA genuine air element.
• The air cleaner uses a dry element, never apply oil.
• Do not run the engine with filter element removed.
• Be sure to refit the dust cup with the arrow
↑ (on the rear of
cup) upright. If the dust cup is improperly fitted, evacuator
valve will not function and dust will adhere to the element.
• Do not touch the secondary element except in cases where
replacing is required.
• To prevent serious damages to the engine, use only a
KUBOTA genuine filter.
Evacuator Valves
Open the evacuator valve (4) once a week under ordinary
conditions or daily when used in a dusty place to get rid of large
particles of dust and dirt.
9Y1210003GEG0044US0
(1) Secondary (Safety) Element
(2) Primary Element
(3) Cover
(4) Evacuator Valve
(5) Element [A] Double Element Type
[B] Single Element Type
KiSC issued 05, 2012 A