OPERATING THE TRACTOR
18
STARTING
A
The seat and suspension should be adjusted to
ensure that the controls are comfortably at hand for the
operator, ensuring that the operator maintains a good
posture and minimizes risks from whole body
vibration.
B
Operator's Seat
To avoid personal injury:
A
Make sure that the seat is completely secured
after each adjustment.
A
Do not allow any person other than the driver to
ride on the tractor.
[Type : COBO SC74/M91]
C
Travel adjustment
Pull the travel adjust lever and slide the seat backward or
forward, as required. The seat will lock in position when
the lever is released.
C
Suspension adjustment
Turn the suspension adjust lever to achieve the optimum
suspension setting.
C
Height adjustment
Pull and slide the height adjust knob to desired position
while sitting in the seat.
A
After adjusting the operator's seat, be sure to check to
see that the seat is properly locked.
[Type: KAB Seating XH2/P1]
C
Travel adjustment
Pull the travel adjust lever and slide the seat backward or
forward, as required. The seat will lock in position when
the lever is released.
C
Suspension adjustment
To increase tension, with the "+" (plus) sign on the handle
facing forward as shown, and cranking the ratchet handle.
To decrease tension, pull the grip out and rotate half a turn
until the "-" (minus) sign is facing forward as shown, and
cranking the ratchet handle.
The ratchet action is now reversed.
C
Height adjustment
Pull and slide the height adjust lever to desired position
while sitting in the seat.
A
After adjusting the operator's seat, be sure to check to
see that the seat is properly locked.
1. Adjusting the operator's position.
(1) Travel adjust lever
(2) Suspension adjust lever
(3) Height adjust knob
(4) Indication of height
(A) To decrease tension
(B) To increase tension
(0) Highest position
(I) Lowest position
(II) Second position
(III) Third position
(1) Travel adjust lever
(2) Suspension adjuster
(3) Height adjust lever
(A) "RAISE"
(B) "LOWER"
(C) "INCREASE"
(D) "DECREASE"
