Kübler SMC1.3, Safety Manual

Page: 231 / 235

R60047.0002 - Index 2 EN – page 111 / 115
19 Technical Specifications
Technical Specifications:
Power supply:
Input voltage:
Protective circuit:
Ripple:
Power consumption:
Protection:
Connections:
18 … 30 VDC
reverse polarity protection
Max. 10 % at 24 VDC
approx. 150 mA (unloaded), approx. 2000 mA
(loaded)
external fuse (3.15 A, medium time-lag) necessary
screw terminal, 1.5 mm² / AWG 16
Encoder
supply:
Number:
Output voltage:
Output current:
Protective circuit:
2
5 VDC / 24 VDC (approx. 2 VDC … 3DVC less the
input voltage)
Max. 200 mA per encoder
short-circuit-proof
Incremental
inputs:
Number of inputs:
Format:
Frequency:
Connections:
2 Encoder (A, /A, B, /B, Z, /Z), (1 Encoder at
SMC1.3)
HTL differential/ HTL single ended/ RS422
Max. 500 kHz
screw terminal, 1.5 mm² / AWG 16
Control inputs:
Number of inputs:
Application:
Signal level:
Load:
Frequency:
Connections:
8 (single lane) or 4 (two-channel,
inverse/homogeneous)
Control signals
HTL PNP (10 ... 30 V)
max. 15 mA
max. 1 kHz
screw terminal, 1.5 mm² / AWG 16
Incremental
output:
(safety related)
Splitter output:
Format:
Frequency:
Connections:
1 Endcoder (A, /A, B, /B, Z, /Z)
HTL differential/ HTL single ended/ RS422
max 500 kHz
screw terminal, 1.5 mm² / AWG 16
Analogue output:
(safety related)
Current output:
Resolution:
Accuracy:
Connections:
4 ... 20 mA (load max. 270 Ohm)
14 Bit
± 0,1%
screw terminal, 1.5 mm² / AWG 16
Control outputs:
(safety related)
Number of outputs:
Output voltage:
Output current:
Switching
characteristic:
Protective circuit:
Connections:
8 (single lane) or 4 (two-channel,
inverse/homogeneous)
HTL (approx. 2 … 3 VDC less than input voltage)
Max. 500 mA per output, shared max 1000 mA
push-pull
short-circuit-proof
screw terminal, 1.5 mm² / AWG 16
Relay output:
(safety related)
Number of relays:
Switching capability:
Switching capacity:
Connections:
1 double relay output, force-actuated (2x NO)
5 ... 250 VAC/ VDC
5 mA ... 5 A
screw terminal, 1.5 mm² / AWG 16
USB interface:
Version/connection:
Operating System:
USB 1.0 / Type B (female)
WIN7 /8 / 10 (tested with (1511 build 10586.104)