Kübler SMC1.3, Safety Manual

Page: 193 / 235

R60047.0002 - Index 2 EN – page 73 / 115
12.10 Clock Generation for Pulsed Readback
(Switch Mode = 9)
With parameter setting “Switch Mode” = 9, the output supplies a clock or an inverted
clock with a specific frequency. The Output Mode of the output in use must be set to
zero. Clock outputs provide different output frequencies. This function is used to
monitor the readback contacts of an external relay (see EDM function).
Relevant Parameters Remark
„Switch Mode “
= 9
„Output Mode“ = 0 for this output (inverse configuration)