R60726.0002
–
Index 6b
EN - page 15
4
Display and touch screen
4.1
Screen structure for parametrization
The parameter menus and the parameters are described in chapter 5.
Start setup procedure:
To edit the parameters,
press the touchscreen for 3 seconds.
Menu selection:
Select the parameter menu via arrow
buttons and confirm with
“OK”.
The menu selection can be
terminated
with „C“.
Parameter selection:
Select the parameter via arrow
buttons and confirm with
„OK“.
The parameter selection can be
terminated with „C“.
Parameter editing:
Edit the parameter via arrow button
up and down, shift cursor via left and
right a
nd save with „OK“.
The parameter editing can be
terminated with
„C“.
Parameter changes becomes active only after closing the menu selection
