KTR-STOP
®
S-A-F B-xx
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
44591 EN
24 of 24
5
Please observe protection
note ISO 16016.
Drawn:
2019-08-13 Pz/Mro
Replacing:
KTR-N dated 2018-12-04
Verified:
2019-08-13 Pz
Replaced by:
•
Remove the screw plug (component 1.20) from the
setting nut (component 1.7).
•
Screw the sensor (component 9) hand-tight into the
brake for the time being (see illustration 26).
•
Tighten the sensor at the tightening torque
T
A
= 20 Nm.
•
Provide for the electric connection according to the
plug-in connection (see illustration 25).
Illustration 26: Assembly of state/wear sensor
6
Accessories - Sensor
6.2 Assembly / start-up
