KTM rc8 r Owner'S Manual Download

Page: 145 / 272

TUNING THE CHASSIS

143

10.20

Adjusting the foot brake lever

100707-10

–

Use the tool to press in the anti-rotation lock



, then turn the piston rod



Info

The range of adjustment is limited.

–

Remove the tool.

The spring tension on the anti-rotation lock is released and the hex nut is locked.

100708-10

–

Check the foot brake lever setting.

Info

Position



of the foot brake lever may vary considerably, depending on the set-

ting.

10.21

Checking the free travel of the foot brake lever

Warning

Danger of accidents

Brake system failure.

–

If there is no free travel on the foot brake lever, pressure builds up on the rear brake circuit. The rear brake can fail due to over-
heating. Adjust the free travel on foot brake lever according to specifications.

Summary of Contents for rc8 r

















































































































































































































































































Search results

Summary of Contents for rc8 r

Reviews:

Related manuals for rc8 r

Brands by name

Popular brands

KTM rc8 r, Owner'S Manual

Search results

Summary of Contents for rc8 r

Reviews:

Related manuals for rc8 r

Brands by name

Popular brands