KTM RC 125, Owner'S Manual

Page: 187 / 211

23 TECHNICAL DATA
185
Screw, return spring, quick shifter
(RC 200) M8 20 Nm (14.8 lbf ft) Loctite ® 243™
Stud, exhaust flange M8 22 Nm (16.2 lbf ft)
–
Cylinder head screw (RC 125) M10 Step 1
25 Nm (18.4 lbf ft)
Step 2
50 Nm (36.9 lbf ft) Thread is oiled, head flat is
greased
Oil pressure sensor M10 14 Nm (10.3 lbf ft)
–
Rotor screw (RC 125) M10 60 Nm (44.3 lbf ft) Loctite ® 243™
Rotor screw (RC 200) M10 60 Nm (44.3 lbf ft) Loctite ® 243™
Screw, cylinder head (RC 200) M10 Step 1
25 Nm (18.4 lbf ft)
Step 2
50 Nm (36.9 lbf ft) Thread is oiled, head flat is
greased
Water temperature sensor M10 14 Nm (10.3 lbf ft)
–
Spark plug M12 15 Nm (11.1 lbf ft)
–
Nut, inner clutch hub M14LH 60 Nm (44.3 lbf ft) Loctite ® 243™
Nut, primary gear/timing chain sprocket M14 55 Nm (40.6 lbf ft) Loctite ® 243™
Oil drain plug M24x1.5 15 Nm (11.1 lbf ft)
–
23.3 Capacities
23.3.1 Engine oil
Engine oil 1.5 l (1.6 qt.) Outside temperature: 0… 50 °C
(32… 122 °F) Engine oil (SAE 15W/50)
( p. 195)
Outside temperature:
−
10…
40 °C (14… 104 °F)
Engine oil (SAE 10W/40)
( p. 196)