KTM Freeride E-XC 2018, Owner'S Manual

Page: 47 / 146

11 TUNING THE CHASSIS
45
11.7 Checking the static sag of the shock absorber
400989-10
–
Measure distance
A
of rear wheel unloaded. ( p. 44)
–
Hold the motorcycle upright with the aid of an assistant.
–
Measure the distance between the rear axle and the fixed point
again.
–
Note down the value as dimension
B
.
Info
The static sag is the difference between
measurements
A
and
B
.
–
Check the static sag.
Static sag 20 mm (0.79 in)
» If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber.
(
p. 46)
11.8 Checking the riding sag of the shock absorber
400990-10
–
Measure distance A of rear wheel unloaded. ( p. 44)
–
With another person holding the motorcycle, the rider, wear-
ing full protective clothing, sits on the seat in a normal sitting
position (feet on footrests) and bounces up and down a few
times.
The rear wheel suspension levels out.
–
Another person now measures the distance between the rear
axle and a fixed point.
–
Note down the value as dimension
C
.
Info
The riding sag is the difference between
measurements
A
and
C
.
–
Check the riding sag.
Riding sag 100 mm (3.94 in)
» If the riding sag differs from the specified measurement:
–
Adjust the riding sag. ( p. 47)