KTM Freeride E-XC 2018, Owner'S Manual

Page: 38 / 146

9 RIDING INSTRUCTIONS
36
9.3 Starting off
Info
When you are riding, the side stand must be folded up and secured with the rubber band.
–
First familiarize yourself with the new riding and handling behavior of this vehicle.
–
Turn the throttle grip carefully. The absence of engine noise belies the actual power of the vehicle.
9.4 Applying the brakes
Warning
Danger of accidents Excessively forceful application of the brakes blocks the wheels.
–
Adjust application of the brakes to the respective riding situation and riding surface conditions.
Warning
Danger of accidents A spongy pressure point on the front or rear brake reduces braking efficiency.
–
Check the brake system and do not continue riding until the problem is eliminated. (Your authorized
KTM workshop will be glad to help.)
Warning
Danger of accidents Moisture and dirt impair the brake system.
–
Brake carefully several times to dry out and remove dirt from the brake linings and the brake discs.
Info
The rear brake lever is located on the left side of the handlebar.
–
When braking, release the throttle and apply the front and rear brakes at the same time.
–
On sandy, wet, or slippery surfaces, use mostly the rear brake if possible.
–
Try to complete the braking procedure before riding into a curve.
9.5 Stopping, parking
Warning
Risk of misappropriation People who act without authorization endanger themselves and others.
–
Never leave the vehicle unattended.
–
Protect the vehicle against access by unauthorized persons.
Warning
Danger of burns Some vehicle components become very hot when the vehicle is operated.
–
Do not touch any parts such as the radiator, motor, shock absorber, or brake system before these parts
have cooled down.
–
Let the vehicle parts cool down before you perform any work on the vehicle.
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.