6 CONTROLS
20
6.5
Start button
C00793-11
The start button
1
is fitted on the right side of the handlebar.
The start button is only enabled when the main switch is switched
on.
When the start button is pushed, the vehicle switches from
standby to ready mode. The driving mode indicator and an
acoustic signal indicate operating readiness.
When the start button is pushed again, the vehicle switches back
to standby mode. The driving mode indicator goes out.
Info
Standby mode can only be switched to ready mode if the
throttle grip is fully closed and the vehicle speed is less
than 5 km/h. If the vehicle is not moved for 90 seconds
after ready mode is activated and the throttle grip is not
twisted open, the vehicle automatically switches back to
standby mode.
Possible states
• The start button is in the neutral position
–
The state of the
vehicle is retained.
• The start button is pressed
–
The state of the vehicle changes
between ready mode and standby mode.
6.6
Horn button
C00822-10
The horn button
1
is fitted on the left side of the handlebar.
Possible states
• Horn button
in neutral position
• Horn button
pressed
–
The horn is operated in this posi-
tion.
6.7
Light switch
C00823-10
The light switch
1
is fitted on the left side of the handlebar.
Possible states
Low beam on
–
Light switch is in the central posi-
tion. In this position, the low beam and tail light are
switched on.
High beam on
–
Light switch is turned to the left.
In this position, the high beam and the tail light are
switched on.
Summary of Contents for Freeride E-XC 2018
Page 1: ...OWNER S MANUAL 2018 Freeride E XC Art no 3213653en...
Page 2: ......
