KTM Freeride 350 2017 Series, Setup Instructions

Page: 14 / 26

3 SERVICE WORK ON THE CHASSIS
12
B01077-11
–
Position the fuel tank.
–
Position the intake flange on the throttle valve body.
–
Tighten hose clamp

.
M00510-11
–
Plug in connector

.
–
Position engine breather hose

.
M00509-11
–
Mount and tighten screws

on both sides.
Guideline
Screw, fuel tank M8 15 Nm
(11.1 lbf ft) Loctite ® 243™
–
Mount and tighten screw

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Insert the fuel tank breather hose into the steering head screw.
M00512-10
–
Thoroughly clean the plug-in connection of the fuel line using compressed air.
Info
Under no circumstances should dirt enter into the fuel line. Dirt in the fuel
line clogs the injection valve!
–
Remove the wash cap set. Lubricate the O-ring and connect plug-in connection

for the fuel line.
Info
Route the cable and fuel line at a safe distance from the exhaust system.
Finishing work
–
Lock the seat. ( p. 10)
3.9 Checking the throttle cable routing
Preparatory work
–
Fold the seat up. ( p. 9)
–
Remove the fuel tank. ( p. 10)