KTM Freeride 350 2013, Owner'S Manual, Page: 46 / 113

12 SERVICE WORK ON THE CHASSIS
44
12.14 Removing the shock absorber
x
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 37)
–
Fold the seat up. ( p. 45)
B01053-10
Main work
–
Remove screw
1
.
–
Remove screw
2
and lower the rear wheel with the swing arm as far as possible
without blocking the rear wheel. Fix the rear wheel in this position.
–
Remove screw
3
.
–
Push splash protector
4
to the side and remove the shock absorber.
12.15 Installing the shock absorber
x
B01053-11
Main work
–
Push splash protector
1
to the side and position the shock absorber. Mount and
tighten screw
2
.
Guideline
Screw, top shock absorber M12 80 Nm
(59 lbf ft) Loctite ® 243™
–
Mount and tighten screw
3
.
Guideline
Screw, bottom shock
absorber M12 80 Nm
(59 lbf ft) Loctite ® 243™
Info
The heim joint for the shock absorber at the swing arm is Teflon coated. It
must not be greased with grease or with other lubricants. Lubricants dis-
solve the Teflon coating, thereby drastically reducing the service life.
–
Mount and tighten screw
4
.
Guideline
Screw, upper subframe M10 45 Nm
(33.2 lbf ft)
Loctite
®
243™
Finishing work
–
Lock the seat. ( p. 45)
–
Remove the motorcycle from the lift stand. ( p. 37)
12.16 Removing the front fender
B01030-10
–
Remove screws
1
. Remove the front fender.
–
Ensure that the spacers remain in place.