KTM Freeride 250 R EU, Owner'S Manual

Page: 99 / 115

22 TECHNICAL DATA
97
Screw, stator M6 8 Nm (5.9 lbf ft) Loctite ® 243™
Screw, water pump cover M6 10 Nm (7.4 lbf ft)
–
Transmission venting connection M6 4 Nm (3 lbf ft) Loctite ® 243™
Screw, cylinder head M8 27 Nm (19.9 lbf ft)
–
Nut, cylinder base M10 35 Nm (25.8 lbf ft)
–
Drain plug, water pump cover M10x1 15 Nm (11.1 lbf ft)
–
Nut, rotor M12x1 60 Nm (44.3 lbf ft)
–
Gear oil drain plug with magnet M12x1.5 20 Nm (14.8 lbf ft)
–
Spark plug M14x1.25 25 Nm (18.4 lbf ft)
–
Nut, inner clutch hub M18x1.5 120 Nm (88.5 lbf ft) Loctite ® 648™
Nut, primary gear M18LHx1.5 150 Nm (110.6 lbf ft) Loctite ® 648™
22.3 Capacities
22.3.1 Gear oil
Gear oil 0.80 l (0.85 qt.) Engine oil (15W/50) ( p. 103)
22.3.2 Coolant
Coolant 0.9 l (1 qt.) Coolant ( p. 103)
22.3.3 Fuel
Total fuel tank capacity,
approx. 7.0 l (1.85 US gal) Super unleaded (95 octane) mixed with 2-stroke engine oil
(1:80) (
p. 104)
Fuel reserve, approx. 1.65 l (1.74 qt.)
22.4 Chassis
Frame Perimeter, steel-aluminum composite frame
Fork
WP Performance Systems
4357 MXMA
Suspension travel
Front 250 mm (9.84 in)
Rear 260 mm (10.24 in)
Fork offset 20 mm (0.79 in)
Shock absorber WP Performance Systems 4618 PDS DCC
Brake system
Front Disc brake with radially mounted four-piston brake caliper
Rear Disc brake with radially mounted dual-piston brake caliper
Brake discs - diameter
Front 260 mm (10.24 in)
Rear 210 mm (8.27 in)
Brake discs - wear limit
Front 2.5 mm (0.098 in)
Rear 3.5 mm (0.138 in)
Tire air pressure, offroad
Front 0.9 bar (13 psi)
Rear 0.7 bar (10 psi)
Tire air pressure, road (EU/AU)
Front 1.5 bar (22 psi)
Rear 1.5 bar (22 psi)
Secondary ratio (EU/AU) 14:46 (12:46)
Secondary ratio (US) 12:46
Chain 5/8 x 1/4” X
‑
ring