KTM Freeride 250 R AUS 2014, Repair Manual

Page: 74 / 222

14 WHEELS
72
–
Activate the hand brake lever multiple times until the brake linings are in contact
with the brake disc.
–
Remove the motorcycle from the lift stand. ( p. 10)
–
Pull the front wheel brake and push down hard on the fork several times to align
the fork legs.
–
Tighten screw
3
.
Guideline
Screw, fork stub M8 15 Nm
(11.1 lbf ft)
14.5.3 Removing the brake disc of the front brake
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 10)
–
Remove the front wheel. ( p. 71)
305971-10
Main work
–
Remove screws
1
. Remove the brake disc.
14.5.4 Installing the brake disc of the front brake
305971-10
Main work
–
Clean the contact surface of the brake disc.
–
Position the brake disc with the label facing outward. Mount and tighten screws
1
.
Guideline
Screw, front brake disc M6 14 Nm
(10.3 lbf ft) Loctite ® 243™
Finishing work
–
Install the front wheel. ( p. 71)
14.6 Rear wheel
14.6.1 Removing the rear wheel
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 10)