12
FUEL TANK, SEAT, TRIM
66
B01718-11
Main work
–
Check the throttle cable routing. (
–
Make sure that no cables are trapped or damaged.
–
Position the fuel tank.
–
Position the intake flange on the carburetor.
–
Tighten hose clamp
1
.
–
Connect the fuel hose.
Info
Route the cable and fuel line at a safe distance from the exhaust system.
B01717-11
–
Mount and tighten screws
2
on both sides.
Guideline
Screw, fuel tank
M8
15 Nm
(11.1 lbf ft)
Loctite
®
243™
–
Mount and tighten screw
3
.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
–
Mount the fuel tank breather.
Finishing work
–
Lock the seat. (
12.12
Fuel tap
B01660-10
The fuel tap is on the left side of the fuel tank.
Using tap handle
1
on the fuel tap, you can open or close the supply of fuel to the
carburetor.
Possible states
• Fuel supply closed
OFF
–
Fuel cannot flow from the fuel tank to the carburetor.
• Fuel supply open
ON
–
Fuel can flow from the fuel tank to the carburetor. The fuel
tank empties down to the reserve level.
• Fuel reserve supply open
RES
–
Fuel can flow from the fuel tank to the carburetor.
The fuel tank empties completely.
