KTM Freeride 250 R AUS 2014, Repair Manual, Page: 22 / 222

6 FORK, TRIPLE CLAMP
20
200701-10
–
Remove spring
bl
.
–
Remove valve
bm
of the rebound damping together with the spring.
–
Take out the piston rod.
6.12 Disassembling the compression holder
Info
The steps are identical for both fork legs.
Preparatory work
–
Disassemble the fork legs. ( p. 15)
200702-10
Main work
–
Clamp the compression holder in a bench vise using soft jaws.
–
Remove nut
1
.
–
Remove the spring.
–
Remove washer
2
.
200703-10
–
Remove piston
3
.
–
Remove shim stack
4
.
200704-10
–
Remove O-ring
5
and seal ring
6
from the compression holder.
–
Extract the compression holder.
6.13 Checking the fork legs
Condition
The fork has been disassembled.
200728-10
–
Check the inner tube and axle clamp for damage.
» If there is damage:
–
Change the inner tube.