19
CARBURETOR
151
306314-10
–
Pull jet needle
9
out pf the throttle slide.
19.8
Checking the choke slide
Condition
The choke slide has been removed.
306317-10
–
Check the choke slide for smooth operation.
» If the choke slide is stiff and soiled:
–
Clean the choke slide and check its activation.
Carburetor cleaner (
–
Check the piston of the choke slide for damage and wear.
» If the piston of the choke slide is damaged or worn:
–
Change the choke slide.
–
Check the collar and locking mechanism.
» If the collar is damaged or brittle, or if the locking mechanism is not functional:
–
Change the choke slide.
19.9
Checking the jet needle
Condition
The jet needle has been removed.
306315-10
–
Check whether the jet needle is bent or if the coating is worn off.
» If the jet needle is bent or if the coating is damaged or worn:
–
Change the jet needle.
–
Check that the needle clip is firmly seated.
» If the needle clip is not firmly seated:
–
Change the needle clip or jet needle.
19.10
Checking the throttle slide
Condition
The throttle slide has been removed.
306316-10
–
Check the throttle slide for damage and wear.
» If the throttle slide is damaged or worn:
–
Change the throttle slide.
–
Check the coating of the throttle slide for damage and wear.
» If the coating is damaged or worn:
–
Change the throttle slide.
