18
30/ENGINE
104
202717-10
–
Remove nut
ct
.
–
Remove the swingarm pivot.
–
Pull the swingarm back slightly.
202718-10
–
Remove screws
dk
.
202719-10
–
Lift out the engine from the side.
Info
You should have an assistant for this step.
Make sure that the engine is sufficiently secured against falling over.
Protect the frame and attachments from damage.
18.2
Installing the engine
202718-11
Main work
–
Position the engine in the frame.
–
Mount screws
1
but do not tighten yet.
Guideline
Engine bracket screw
M10
60 Nm
(44.3 lbf ft)
202717-11
–
Position the swingarm.
–
Mount the swingarm pivot.
–
Mount and tighten nut
2
.
Guideline
Nut, swingarm pivot
M14x1.5
75 Nm
(55.3 lbf ft)
–
Tighten screws
1
.
Guideline
Engine bracket screw
M10
60 Nm
(44.3 lbf ft)