KTM Freeride 250 R AUS 2014, Repair Manual

Page: 101 / 222

17 LIGHTING SYSTEM, INSTRUMENTS
99
602813-10
Main work
–
Turn rubber cap
1
together with the underlying bulb socket counterclockwise all
the way and remove it.
–
Pull bulb socket
2
of the parking light out of the reflector.
100862-10
–
Press headlight bulb
3
lightly into the bulb socket, turn it counterclockwise, and
pull it out.
–
Insert the new headlight bulb.
Headlight (S2/socket BA20d) ( p. 172)
–
Insert the rubber cap with the bulb socket into the reflector and turn it clockwise
all the way.
Info
Ensure that O-ring
4
is seated properly.
–
Insert the bulb socket of the parking light into the reflector.
Finishing work
–
Refit the headlight mask with the headlight. ( p. 68)
–
Check the headlight setting. ( p. 97)
17.10 Changing the speedometer battery
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 67)
B01643-10
Main work
–
Remove screws
1
.
–
Pull the speedometer upward out of the holder.
B01644-10
–
Using a coin, turn protection cap
2
all the way counterclockwise and remove it.
–
Remove speedometer battery
3
.
–
Insert the new battery with the label facing outward.
Speedometer battery (CR 2032) ( p. 172)
–
Check the O-ring of the protection cap for correct seating.
B01645-10
–
Position protection cap
2
and turn all the way clockwise using a coin.
–
Press any button on the speedometer.
The speedometer is activated.
–
Position the speedometer in the holder.
–
Mount and tighten the screws with washers.
Finishing work
–
Refit the headlight mask with the headlight. ( p. 68)
–
Check the headlight setting. ( p. 97)