KTM Freeride 250 F 2018, Owner'S Manual

Page: 49 / 157

TUNING THE CHASSIS 11
47
400988-10
Main work
–
Measure the distance
–
as vertical as possible
–
between the
rear axle and a fixed point, for example, a mark on the rear
fairing.
–
Note down the value as dimension A .
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 53)
11.7 Checking the static sag of the shock absorber
400989-10
–
Measure distance
A
of rear wheel unloaded. ( p. 46)
–
Hold the motorcycle upright with the aid of an assistant.
–
Measure the distance between the rear axle and the fixed point
again.
–
Note down the value as dimension
B
.
Info
The static sag is the difference between
measurements
A
and
B
.
–
Check the static sag.
Static sag 25 mm (0.98 in)
» If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber.
(
p. 48)