3 WORK
10
3.5
Installing the engine guard
E02381-11
–
Position engine guard
1
, mount screws
2
with bushings
and tighten.
Guideline
Screw, engine guard
M6
10 Nm (7.4 lbf ft)
3.6
Removing the seat
Condition
The motorcycle is stationary.
The engine is off.
The ignition has been switched on or off for less than 1 minute.
E02343-10
–
Press seat release button
1
.
–
Raise the rear of the seat, pull the seat back, and lift it off
upward.
3.7
Mounting the seat
401677-10
–
Hook holding lug
1
of the seat onto the fuel tank, lower the
rear and push it forward.
–
Insert locking pin
2
into the lock housing and push down the
rear of the seat until the locking pin engages with a click.
–
Check that the seat is correctly mounted.
