6 CONTROLS
16
6.5
Light switch
E02216-10
The light switch
1
is fitted on the combination switch on the
left.
Possible states
Low beam on
–
Light switch in position
A
. In this
position, the low beam and tail light are switched on.
High beam on
–
Push the light switch to position
B
.
In this position, the high beam and the tail light are
switched on.
Headlight flasher.
–
Push the light switch into posi-
tion
C
.
6.6
Cruise control buttons
E02327-10
Info
The functions described here apply to models without adaptive cruise control
(ACC)
or with active cruise
control mode
CC Only
.
Cruise control buttons
1
,
2
and
3
are located on the left side of the combination switch.
Possible states
• Cruise control button
is pressed briefly
–
The cruise control function is switched on or off. The operating
mode is displayed on the dash.
•
+RES
button is pressed briefly
–
The last saved speed is reapplied. Every subsequent brief pressing increases
the target speed by 1 km/h or 1 mph.
•
+RES
button is pressed and held
–
The target speed increases in increments of 5 km/h or 5 mph.
•
‑
SET
button is pressed briefly
–
The cruise control function is activated and the current speed is maintained.
Every subsequent brief press reduces the target speed by 1 km/h or 1 mph.
•
‑
SET
button is pressed and held
–
The target speed decreases in increments of 5 km/h or 5 mph.
