KTM F7303U2, Setup Instructions

Page: 32 / 51

3 WORK
30
–
Disconnect the battery charger after charging the 12-V battery.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Recharge the 12-V battery
regularly when the motorcy-
cle is not being used
3 months
Finishing work
–
Connect the negative cable of the 12-V battery. ( p. 32)
–
Mount the seat. ( p. 20)
3.13 Installing the 12-V battery
S03494-10
Main work
–
Insert the 12 V battery into the battery compartment with the
terminals facing forward and secure with holding bracket
1
.
12-V battery (HJTZ5S-FP-C)
–
Mount and tighten screw
2
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
S03492-11
–
Place relays
3
and connector
4
on the battery compart-
ment and attach the wiring harness
5
.