SERVICE WORK ON THE CHASSIS 11
59
V01703-11
–
Position the left frame protector.
–
Insert the right frame protector from below and push it to the
rear.
–
Mount and tighten screws
7
with the washers.
Guideline
Screw, frame protec-
tor
M5
3 Nm (2.2 lbf ft)
–
Mount and tighten screw
8
.
Guideline
Screw, frame protec-
tor
M5
3 Nm (2.2 lbf ft)
–
Mount the new cable ties.
Finishing work
–
Remove the motorcycle from the lift stand. (
11.20
Removing the seat
K01133-10
–
Remove screw
1
.
H02218-10
–
Raise the rear of the seat, pull the seat back, and lift it off.
11.21
Mounting the seat
H02218-11
–
Mount the front of the seat on the collar bushings of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure the seat is locked in correctly.
