KTM F5375T5 Owner'S Manual Download Page 52

Page: 52 / 287

7 COMBINATION INSTRUMENT

7.1

Combination instrument

S04176-10

The combination instrument is attached in front of the handlebar.
The combination instrument is divided into two function areas.

indicator lamps (

p. 54)

Display

7.2

Activation and test

S04177-10

Activation

The combination instrument is activated when the ignition is
switched on.

Info

The brightness of the displays is controlled by an ambient
light sensor in the combination instrument.

Test

The welcome text appears on the display and the indicator lamps
are briefly activated for a function check.

Summary of Contents for F5375T5
































































































































































































































































































Search results

Summary of Contents for F5375T5

Reviews:

Related manuals for F5375T5

Brands by name

Popular brands

KTM F5375T5, Owner'S Manual

Search results

Summary of Contents for F5375T5

Reviews:

Related manuals for F5375T5

Brands by name

Popular brands