KTM F5375T5 Owner'S Manual Download Page 123

Page: 123 / 287

RIDING INSTRUCTIONS 10

121

10.6

Applying the brakes

Warning

Danger of accidents

Moisture and dirt impair the brake system.

–

Brake carefully several times to dry out and remove dirt from the brake linings and the brake discs.

Warning

Danger of accidents

A spongy pressure point on the front or rear brake reduces braking efficiency.

–

Check the brake system and do not continue riding until the problem is eliminated. (Your authorized
KTM workshop will be glad to help.)

Warning

Danger of accidents

The brake system fails in the event of overheating.

If the foot brake lever is not released, the brake linings drag continuously.

–

Take your foot off the foot brake lever when you are not braking.

Warning

Danger of accidents

Higher total weight increases the stopping distance.

–

Take the longer stopping distance into account when carrying a passenger or luggage with you.

Warning

Danger of accidents

Salt on the roads impairs the brake system.

–

Brake carefully several times to remove salt from the brake linings and the brake discs.

Summary of Contents for F5375T5
































































































































































































































































































Search results

Summary of Contents for F5375T5

Reviews:

Related manuals for F5375T5

Brands by name

Popular brands

KTM F5375T5, Owner'S Manual

Search results

Summary of Contents for F5375T5

Reviews:

Related manuals for F5375T5

Brands by name

Popular brands