16 ELECTRICAL SYSTEM
188
V00615-10
–
Position the socket with the high beam bulb in the headlight
housing.
–
Turn the socket clockwise.
–
Check that the lighting is functioning properly.
Finishing work
–
Check the high beam headlight adjustment. (
16.8
Checking the low beam headlight adjustment
0
0
A
A
0
0
B
B
400726-10
–
Position the vehicle upright on a horizontal surface in front of
a light wall and make a marking at the height of the center of
the low beam headlight.
–
Make another mark at a distance
B
under the first marking.
Guideline
Distance
B
5 cm (2 in)
–
Position the vehicle perpendicular to the wall at a distance
A
from the wall and switch on the low beam.
