BRAKE SYSTEM 13
73
S04753-10
–
Position the vehicle upright.
–
Remove screw cap
2
with membrane
3
.
–
Add brake fluid up to the marking
A
.
Brake fluid DOT 4 / DOT 5.1 (
–
Mount the screw cap with the membrane.
Info
Immediately clean up any brake fluid that has over-
flowed or spilled with water.
H01142-10
Condition
The screw cap is locked.
–
Position the screw cap lock and mount and tighten
screw
1
.
Guideline
Screw, compensat-
ing tank cap lock,
rear brake
M5
9 Nm (6.6 lbf ft)
13.11
Checking the rear brake linings
Warning
Danger of accidents
Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)
Warning
Danger of accidents
Damaged brake discs reduce the braking effect.
If the brake linings are not changed in time, the brake lining carriers grind against the brake disc. As a
consequence, the braking effect is greatly reduced and the brake discs are destroyed.
–
Check the brake linings regularly.
F00853-10
–
Check the brake linings for minimum thickness
A
.
Minimum thickness
A
≥
1 mm (
≥
0.04 in)
» If the minimum thickness is less than specified:
–
Change the rear brake linings.
–
Check the brake linings for damage and cracking.
» If there is wear or tearing:
–
Change the rear brake linings.
Summary of Contents for F4303U1
Page 1: ...OWNER S MANUAL 2021 390 DUKE Art no 3214321en ...
Page 2: ......
