KTM F4303U1 Owner'S Manual Download

Page: 40 / 130

7 COMBINATION INSTRUMENT

V01174-01

Setting the date

–

Press

DOWN

button until the date is marked.

–

Press the

SET

button.

The day flashes and is underlined.

–

Press

DOWN

button until the current day is set.

–

Press the

SET

button.

The month flashes and is underlined.

–

Press

DOWN

button until the current month is set.

–

Press the

SET

button.

The year flashes and is underlined.

–

Press

DOWN

button until the current year is set.

–

Press the

SET

button.

The date is stored.

7.17.22 Distance

V01176-01

Condition

• The motorcycle is stationary.

–

Press the

SET

button when the menu is closed.

–

Press the

DOWN

button until

Settings

is highlighted.

Press the

SET

button to open the menu.

–

Press the

DOWN

button until

Units

is highlighted. Press

the

SET

button to open the menu.

–

Press the

DOWN

button until

Distance

is marked. Press

the

SET

button to open the menu.

–

Activate the menu item using the

DOWN

button.

–

Press

SET

button to confirm the desired unit.

7.17.23 Temperature

E01064-01

Condition

• The motorcycle is stationary.

–

Press the

SET

button when the menu is closed.

–

Press the

DOWN

button until

Settings

is highlighted.

Press the

SET

button to open the menu.

–

Press the

DOWN

button until

Units

is highlighted. Press

the

SET

button to open the menu.

–

Press the

DOWN

button until

Temperature

is marked.

Press the

SET

button to open the menu.

–

Activate the menu item using the

DOWN

button.

–

Press

SET

button to confirm the desired unit.

Summary of Contents for F4303U1



































































































































Search results

Summary of Contents for F4303U1

Reviews:

Related manuals for F4303U1

Brands by name

Popular brands

KTM F4303U1, Owner'S Manual

Search results

Summary of Contents for F4303U1

Reviews:

Related manuals for F4303U1

Brands by name

Popular brands