KTM F4303U1, Owner'S Manual

Page: 32 / 130

7 COMBINATION INSTRUMENT
30
Info
The
Bluetooth ®
function can only be used in conjunction
with KTM MY RIDE (optional).
When the Bluetooth ® function is switched on and the device
is connected, the Bluetooth ® symbol appears in the display
of the combination instrument.
Not every cellphone and headset is suitable for pairing with
the combination instrument.
7.17.6 Phone (optional)
F01959-01
Condition
• The motorcycle is stationary.
• Function
KTM MY RIDE (optional) activated.
• Function Bluetooth (optional) activated.
• The Bluetooth ® function should also be activated in the device
to be paired.
–
Press the SET button when the menu is closed.
–
Press the
UP
or
DOWN
button until
KTM MY RIDE
is marked.
Press the
SET
button to open the menu.
–
Press the UP or DOWN button until Pairing is marked. Press
the SET button to open the menu.
–
Press the UP or DOWN button until Phone is marked. Press the
SET button to open the menu.
Info
Two cellphones can never be paired simultaneously
with the combination instrument.
–
Press the UP or DOWN button until Pairing is marked. Press the
SET button to open the menu.
–
The combination instrument starts searching for a suitable
cellphone. If the search was successful, the name of the cell-
phone is displayed in the
Pairing menu. Press the SET button
to start the pairing.
Info
The cellphone must be visible via Bluetooth ® for the
cellphone to be found by the combination instrument.
–
A message appears on the combination instrument indicat-
ing that this is now ready for pairing. The pairing is completed
successfully by confirming the
Passkey on the cellphone and
on the combination instrument.
Info
Once the pairing is completed, the registered trademark
of the paired cellphone is displayed in the
Phone menu.
Press the
UP
or
DOWN
button until the paired device is
marked. The paired device can be deleted by pressing
the
SET button.
Not every cellphone is suitable for pairing with the
combination instrument.