KTM F3001U6, Owner'S Manual, Page: 92 / 109

19 STORAGE
90
19.1 Storage
Info
If you plan to garage the motorcycle for a longer period, perform the following steps or have them per-
formed.
Before storing the motorcycle, check all parts for function and wear. If service, repairs, or replacements
are necessary, you should do this during the storage period (less workshop overload). In this way, you can
avoid long workshop waiting times at the start of the new season.
401058-01
–
Clean the motorcycle. ( p. 88)
–
Check tire pressure. ( p. 80)
–
Charge the Powerpack LV. ( p. 83)
Guideline
Stop charging at 30%.
The last segment lights up yellow.
Tip
If necessary, ride the vehicle to deplete the
Powerpack LV sufficiently.
–
Store the vehicle in a dry location that is not subject to large
fluctuations in temperature.
Guideline
Ideal storage temperature 10 … 20 °C (50 … 68 °F)
Info
KTM recommends jacking up the motorcycle.
–
Raise the motorcycle with a lift stand. ( p. 45)
–
Cover the motorcycle with a tarp or cover that is permeable to
air.
Info
Do not use non-porous materials since they prevent
humidity from escaping, thus causing corrosion.
19.2 Preparing for use after storage
401059-01
–
Remove the motorcycle from the lift stand. ( p. 45)
–
Charge the Powerpack LV. ( p. 83)
–
Perform checks and maintenance measures when preparing for
use. (
p. 24)
–
Take a test ride.