KTM F3001U1, Owner'S Manual

Page: 47 / 157

SERVICE SCHEDULE 11
45
11.1 Additional information
Any further work that results from the compulsory work or from the recommended work must be ordered sepa-
rately and invoiced separately.
Different service intervals may apply in your country, depending on the local operating conditions.
Individual service intervals and scopes may change in the course of technical developments. The most up-to-date
service schedule can always be found on KTM Dealer.net. Your authorized KTM dealer will be happy to advise
you.
11.2 Required work
Every 80 operating hours
Every 50 operating hours
Every 20 operating hours when used for motorsports
After 1 operating hour
Read out the fault memory using the KTM diagnostics tool.
○ ● ● ●
Check that the electrical system is functioning properly.
○ ● ●
Check and charge the 12 V battery.
● ●
Check and charge the Powerpack HV.
○ ● ●
Check the front brake linings. ( p. 82)
● ●
Check the rear brake linings. ( p. 88)
● ●
Check the brake discs. ( p. 79)
● ●
Check the brake lines for damage and leakage.
● ●
Check the frame. ( p. 77)
● ●
Check the link fork. ( p. 77)
● ●
Check the shock absorber heim joint for play.
● ●
Check the tire condition. ( p. 95)
○ ● ●
Check tire pressure. ( p. 95)
○ ● ●
Check the wheel bearing for play.
● ●
Check the wheel hubs.
● ●
Check the rim run-out.
○ ● ●
Check the spoke tension. ( p. 96)
○ ● ●
Check the chain, rear sprocket, engine sprocket, and chain guide. ( p. 75)
● ●
Check the chain tension. ( p. 73)
○ ● ●
Grease all moving parts (e.g. side stand, hand lever, chain, etc.) and check for smooth opera-
tion.
○ ● ●
Check the front brake fluid level. ( p. 80)
● ●
Check the rear brake fluid level. ( p. 86)
● ●
Check the travel of the brake levers.
● ●
Check steering head bearing play. ( p. 64)
○ ● ●
Check all hoses and bellows for cracking, leakage and incorrect routing.
○ ● ●
Check the antifreeze and coolant level. ( p. 121)
○ ● ●
Check the cables for damage and for routing without kinks.
● ●
Service the fork.
●
Perform the shock absorber service.
●
Check the battery discharge plug form ring. ( p. 71)
○ ● ●
Check the tightness of the easily accessible, safety-relevant screws and nuts.
○ ● ●
Check the Powerpack HV fitting for the specified tightening torque.
○ ● ●