KTM Chassis 690 SMC, Owner'S Manual, Page: 92 / 186

MAINTENANCE WORK ON CHASSIS AND ENGINE
90
600639-10
–
Remove screws

on foot brake cylinder

.
–
To adjust the basic position of the footbrake lever individually, loosen nut

and turn
screw

accordingly.
Info
The range of adjustment is limited. The screw must be screwed into the footrest
bracket by at least four turns.
–
Position foot brake cylinder

so that the foot brake pedal has the necessary free
travel. Hold screws

in place and tighten the nuts.
Guideline
Nut, foot brake cylinder screw M6 10 Nm (7.4 lbf ft)
–
Check the free play of the foot brake lever. ( p. 89)
–
Tighten nut

.
9.41
Checking rear brake fluid level
Warning
Danger of accidents Brake system failure.
–
If the brake fluid level falls below the
MIN
mark, this indicates a leakage in the brake system or worn-out brake linings. Have
the brake system checked in an authorized KTM workshop, and do not ride any further.