KTM Chassis 690 SMC, Owner'S Manual, Page: 50 / 186

RIDING INSTRUCTIONS
48
Warning
Danger of burns Some vehicle components get very hot when the machine is driven.
–
Do not touch hot components such as exhaust system, radiator, engine, shock absorber and brakes. Allow these components to
cool down before starting work on them.
Note
Danger of damage
The parked vehicle can roll away or fall over.
–
Always place the vehicle on a firm and even surface.
Note
Fire hazard Some vehicle components get very hot when the machine is driven.
–
Do not place the vehicle where there are flammable or explosive substances. Do not place objects over the vehicle while it is still warm
from being run. Always let the vehicle cool first.
Note
Material damage Damage and destruction of components by excessive load.
–
The side stand is designed for the weight of the motorcycle only. Do not sit on the motorcycle when it is supported by the side stand
only. The side stand and/or the frame could be damaged and the motorcycle could fall over.
–
Brake the motorcycle.
–
Shift gear to neutral.
–
Switch off the ignition by turning the ignition key to position OFF .
Info
If the engine is switched off with the emergency OFF switch and the ignition remains switched on at the ignition lock, power
continues to flow to most power consumers and the battery will discharge. You should therefore always switch off the engine
with the ignition key - the emergency OFF switch is intended for emergencies only.
–
Park the motorcycle on a hard surface.
–
Swing the side stand forward with your foot as far as it will go and lean the vehicle on it.