MAINTENANCE WORK ON CHASSIS AND ENGINE
102
9.49
Checking the rear hub rubber dampers
x
Info
The engine power is transmitted from the rear sprocket to the rear wheel via 6 rubber dampers. They eventually wear out during
operation. If the rubber dampers are not changed in time, the rear sprocket carrier and the rear hub will be damaged.
–
Remove the rear wheel.
600623-10
–
Check the rubber dampers
of the rear hub for damage and wear.
» If the rubber dampers of the rear hub are damaged or worn:
–
Change all rubber dampers in the rear hub.
600624-10
–
Lay the read wheel on a workbench with the rear sprocket facing upwards and insert the
wheel spindle in the hub.
–
To check the play
, hold the rear wheel tight and try to rotate the rear sprocket.
Info
Measure the play on the outside of the rear sprocket.
Play in rubber dampers, rear wheel
≤
5 mm (
≤
0.2 in)
» If clearance
is larger than the specified value:
–
Change all rubber dampers in the rear hub.
–
Install the rear wheel.
Summary of Contents for Chassis 690 SMC
