KTM 990 SupermotoR, Owner'S Manual

Page: 163 / 208

SERVICE WORK ON THE ENGINE
161
16.4
Filling up with engine oil
x
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
101169-10
–
The oil must be added in two steps.
Engine oil 3.80 l
(1.004 US gal) External
temperature:
≥
0 °C (
≥
32 °F)
Engine oil
(SAE 10W/50)
( p. 195)
External
temperature:
< 0 °C (< 32 °F) Engine oil (SAE
5W/40) (
p. 195)
–
Remove plug

and add engine oil to the top marking

.
–
Mount the plug.
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may result
in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
–
Start the engine and run it until it reaches operating temperature.
Six bars of the temperature display light up.
–
Check the lubrication system for leaks.
–
Switch off the engine.
–
Park the motorcycle on a horizontal surface in a vertical position (not on the side
stand).