KTM 990 Supermoto R USA 2010, Owner'S Manual

Page: 74 / 220

SERVICE SCHEDULE
72
Service schedule
K10N K75A K150A K300A
Check that the electrical equipment is functioning properly. • • • •
Read out the trouble code memory using the KTM diagnostics tool. x
• • • •
Change the engine oil and filter, clean the oil screens. x ( p. 163)
• • • •
Check the oil jet for the clutch lubrication.
x
• • •
Check the front brake linings. ( p. 100) • • • •
Check the front brake discs. ( p. 95) • • • •
Check the rear brake linings. ( p. 104) • • • •
Check the rear brake disc. ( p. 96) • • • •
Check that brake lines are undamaged and free of leaks. • • • •
Check the rear brake fluid level. ( p. 102) • • • •
Check the free travel of the foot brake lever. ( p. 97) • • • •
Check the shock absorber and fork for leaks. Perform a fork and shock absorber service if needed
and depending on vehicle use.
• • • •
Check the swingarm bearings. x
• • •
Check the wheel bearing for play.
x
• • •
Check the tire condition. ( p. 112) • • • •
Check the tire air pressure. ( p. 114) • • • •
Check the chain, rear sprocket and engine sprocket. ( p. 93) • • •
Check the chain tension. ( p. 90) • • • •
Lubricate all moving parts (e.g. side stand, hand lever, chain, ...) and check for smooth opera-
tion.
x
• • • •
Clean the dust boots of the fork legs. • • •