KTM 990 Adventure AUS, Owner'S Manual, Page: 85 / 218

SERVICE WORK ON THE CHASSIS
83
10.11
Mounting the seat
0 0 3 3 0 0 1 1 0 0 2 2
100505-10
–
Hook projection

of the seat into the storage compartment, lower the seat at the rear
and push it forward at the same time. The two projections

must be inserted into the
frame.
–
Push locking pin

into the lock housing and push the back of the seat down until the
locking pin locks in place with an audible click.
–
Finally, check that the seat is correctly mounted.
10.12
Removing the storage compartment and hanging it to one side
x
–
Remove the seat. ( p. 82)
100616-10
–
Open the storage compartment. ( p. 38)
–
Remove screws

.
–
Carefully remove the storage compartment and swing it to the right. Place a cloth
between the right fuel tank and the storage compartment to prevent damage.